Tektronix MTG100 User Manual
Page 211
Appendix C: Using the ReMux Application
CĆ12
MTG100 & MTG300 MPEG Generator User Manual
Editing the TMCC Information for the Transport Stream.
6. Double-click the TMCC icon to open the Edit TMCC Information dialog
box to edit the TMCC information for the transport stream (See Figure C-8).
Figure CĆ8: EditTMCC Information dialog box (SĆTMCC)
In this dialog box, you can set the following parameters:
H Transmitter/Receiver Control Information: Sets the transmission/receiv-
ing control information.
H Switch On Control Signal: Sets the start control signal to on (1) or
off (0).
H Reserve: Sets the reserve bit.
7. After you change the parameters, click the OK button to confirm the changes
and close the dialog box.
Creating a Transport Stream of SĆTMCC Structure.
8. Select Execute in the ReMux pull-down menu or click the
"
(Execute)
button to open the Save As... dialog box.
9. In the dialog box, specify a file name, and then click the Save button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com