Tektronix MTG100 - Manual (Page 73)

Pull-down Menus
3Ć14
MTG100 & MTG300 MPEG Generator User Manual
Table 3Ć12: Insertion Setup dialog box parameters (Cont.)
Parameter Description
File Interval Sets the time interval between file insertions. The insertion file will be
repeatedly inserted into the transport stream output at the specified time
interval. You can set the interval from 100 ms to 3000 ms in 10 ms steps.
Packet Interval Data in the insertion file is packetized by the MPEG generator prior to being
inserted in the transport stream output. Use this parameter to set the time
intervalbetween the packets of the insertion file. You can set the packet
intervalfrom 1 to 1000 packets in 1 packet steps.
Table 3Ć13: Bezel menu commands for the Insertion Setup dialog box
Command Description
Default Resets all of the dialog box settings back to the factory default settings.
Cancel Cancels any setting changes and closes the dialog box.
Apply Enables all setting changes. When you apply setting changes, data output
from the MPEG generator is stopped. You must restart the MPEG generator
output for the setting changes to appear.
When you select the Insert TOT/TDT... command from the CONFIG pull-down
menu or you select TDT... or TOT... from the Bezel menu of a selected TDT or
TOT icon in the hierarchy display, the TOT Item or TDT Item dialog box
appears. Figure 3-6 shows the TOT Item dialog box. Use the arrow buttons to
highlight the desired parameter, and then use the rotary knob or hexadecimal
keypad to set values. Press the Keep Stress bezel button to apply changes.
NOTE. The TDT Item or TOT Item dialog box is available from the CONFIG
pull-down menu only when the selected transport stream file is in ARIB or DVB
formats and a TDT (Time and Data Table) or TOT (Time Offset Table) does not
already exist in the transport stream.
Table 3-14 describes the TOT Item dialog box parameters and Table 3-15
describes the Bezel menu commands associated with the dialog box.
TOT Item Dialog Box
(MTG300 Only)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com