HEIDENHAIN iTNC 530 (34049x-08) Cycle programming - Manual (Page 229)

HEIDENHAIN iTNC 530 229
8.2 C
Y
LINDER SURF
A
C
E (Cy
cle 27
, DIN/ISO:
G127
, sof
tw
ar
e option
1) Cycle parameters
 Milling depth
Q1 (incremental): Distance between
the cylindrical surface and the floor of the contour.
Input range -99999.9999 to 99999.9999
 Finishing allowance for side Q3 (incremental):
Finishing allowance in the plane of the unrolled
cylindrical surface. This allowance is effective in the
direction of the radius compensation. Input range
-99999.9999 to 99999.9999
 Set-up clearance
Q6 (incremental): Distance
between the tool tip and the cylinder surface. Input
range 0 to 99999.9999; alternatively PREDEF
 Plunging depth
Q10 (incremental): Infeed per cut.
Input range -99999.9999 to 99999.9999
 Feed rate for plunging
Q11: Traversing speed of the
tool in the spindle axis. Input range 0 to 99999.9999;
alternatively FAUTO, FU, FZ
 Feed rate for milling Q12: Traversing speed of the
tool in the working plane. Input range 0 to
99999.9999; alternatively FAUTO, FU, FZ
 Cylinder radius
Q16: Radius of the cylinder on which
the contour is to be machined. Input range 0 to
99999.9999
 Dimension type? deg=0 MM/INCH=1
Q17: The
coordinates for the rotary axis of the subprogram are
given either in degrees or in mm (or inches).
Example: NC blocks
63 CYCL DEF 27 CYLINDER SURFACE
Q1=-8 ;MILLING DEPTH
Q3=+0 ;ALLOWANCE FOR SIDE
Q6=+0 ;SET-UP CLEARANCE
Q10=+3 ;PLUNGING DEPTH
Q11=100 ;FEED RATE FOR PLNGNG
Q12=350 ;FEED RATE FOR MILLING
Q16=25 ;RADIUS
Q17=0 ;TYPE OF DIMENSION