HEIDENHAIN ND 2100G - Manual (Page 86)

86 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Nominal with ++ tolerances
A nominal value is displayed with tolerances entirely on the plus side
of nominal.
To specify a range of tolerances above the nominal value (+
Tolerance):
U Press the +/- soft key
U Enter the high end of the positive tolerance range into the + Max,
+ Limit and + Warn fields
U Enter the Nominal value
U Enter the low end of the positive tolerance range into the -Warn
U Press the ++/-- soft key to change the fields to + Warn
U Repeat this procedure for the - Limit and - Min fields. This
establishes the lower end of the positive range of tolerances.
Nominal and ++ tolerances for dimension A.
Bar graph showing ++ tolerances.
3 mm nominal
0.03 Nom - Warning
0.02 Nom - Limit
0.00 Nom - Min
0.08 Nom + Max
0.06 Nom + Limit
0.05 Nom + Warning