HEIDENHAIN ND 2100G - Manual (Page 3)

ND 2100G GAGE-CHEK 3
ND 2100G Introduction
ND 2100G panel keys
Panel keys are used to initiate feature measurements, apply
tolerances, send reports of measurement results and configure
operational parameters.
quit cancel
enter finish
+/- 0
4
1
7
5 6
2 3
8 9
1 1
2
3
4
5
7 8
9
6
1 LCD screen
2 Soft keys
3 Dimension keys
4 Command keys
5 Arrow cursor keys
6 Numeric Keypad
7 Fast track keys
8 Send key
9 LCD on/off key
Panel function key Panel key
Soft keys: Functions change in support of the activities displayed
on the LCD.
Dimension keys: Can be assigned one of six hot key functions
for use when DRO screen is displayed. When graph, bar value or
data screens are displayed, dimension keys are used to display
values for single dimensions or a smaller group of dimensions.
Command keys: Control measurement and data entry
processes.
Arrow cursor keys: Used to scroll through lists and navigate
menus and setup screen data fields.
Fast track keys: Two programmable fast track keys are used to
perform frequently used functions. These keys can easily be
located by touch without taking your eyes off the part. Users can
program either fast track key as described later in the Hotkeys
portion of Chapter 2: Installation, Setup and Specifications.
quit cancel
enter finish