HEIDENHAIN ND 2100G - Manual (Page 235)

ND 2100G GAGE-CHEK 235
2.4 F
o
rm
ulas
DoutBin
Insert the DoutBin function to output a specified logic level to multiple
parallel port output pins simultaneously. The new logic level can be
presented continuously or for a specified period.
The logic level is presented to the pins specified by the lines mask, no
other pins are affected. If a delay is also specified, the logic level will
be presented for the delay period, and then the affected output pins
will be changed to the opposite logic state.
To insert the DoutBin function:
U Press the OTHER... soft key
U Press the XTRA dimension key
U Use the arrow cursor keys to highlight DoutBin
U Press the ENTER key
DoutBin function. DoutBin function syntax
Hn = DoutBin(Lines, state, delay)
Where: Lines is a decimal value of the binary mask that specifies
which output pins are used.
State is the logic level to output to the specified pins.
Delay is the output period in seconds - if a delay is not
included, the output is continuous.