HEIDENHAIN ND 2100G - Manual (Page 117)

ND 2100G GAGE-CHEK 117
2
.3
S
o
ft
wa
re
s
e
tu
p The standard and observed values at the end of each segment are
entered as data into a station in the SLEC setup screen. For example,
the standard and observed values at the end of segment 0 on the
diagram are 400 and 400, and are entered in this screen for station 0.
When the procedure is complete and setup data are entered,
correction coefficients will be calculated for the input based on the
standard and observed values at the end of each segment.
1
2
1 Station number
2 Data
Nominal (Standard)
Measured (Observed)
Machine 0,0
(Reference)
Deviation
Station 0 Station 6
Segment 0
Segment 1
Segment 2
Segment 3
Segment 4
Segment 5
Segment 6