HEIDENHAIN ND 2100G - Manual (Page 132)

132 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Send setup screen
The Send setup screen contains fields for specifying the contents of
record data files transmitted to computers. The Auto Send record
feature can also be enabled in this screen.
Auto Send Rec
Record data can be transmitted automatically as each record is
entered into the database.
To enable Auto Send Rec:
U Highlight the Auto Send Rec field
U Press the YES soft key
U Press the ENTER key
Record Number
To specify Record Number:
U Highlight the Record Number field
U Press the YES or RELATIVE soft key
U Press the ENTER key
Record date, label and units of measure
Three fields provide the opportunity to include or omit record data with
selections of Yes or No.
To specify record date, label or units to include:
U Highlight the desired field
U Press the YES soft key
U Press the ENTER key
Send setup screen.
Refer to the discussion of record numbers for the Report
setup screen on page 127 for more details regarding
record number choices.
Field Description
Time Stamp Date and time data was collected.
Dimension
Labels Labels Dimension labels at tops of column.
Dimension
Units Units of measure printed with values.