HEIDENHAIN ND 2100G - Manual (Page 37)

ND 2100G GAGE-CHEK 37
1
.4 LCD scr
eens and menus
Menu soft keys
Pressing the MENU... soft key changes soft key labels to show Menu
options: View..., in/mm, Datum..., Extra and Setup.
The datum menu functions
The DATUM... functions provide the means to ZERO, PRESET, CLEAR
and toggle between measurement reference datums.
Menu soft keys.
Menu soft keys Function
VIEW... Pressing the VIEW... soft key provides
access to View menu options. Refer to "View
soft keys and screens" on page 28.
IN/MM Pressing IN/MM soft key toggles between
inch and millimeter units of measure for
applicable dimensions. Refer to "in/mm menu
items" on page 35.
DATUM... Pressing the DATUM... soft key provides
access to Datum menu options.
EXTRA Pressing the EXTRA soft key provides access
to Extra menu options.
SETUP Pressing the SETUP soft key provides access
to Setup menu options.
Datum soft keys.
Datum soft keys Function
D0/D1 Pressing the D0/D1 soft key toggles between
the absolute datum (D0) and the incremental
datum (D1).
ZERO... The Zero menu function can be used at any
time to simultaneously zero all incremental
datums, or to zero any specific incremental
datum.
MASTER The Master functions are used to calibrate
the encoder datums or transducer input
channel ranges.
PRESET The Dimension Preset screen is used to
preset incremental datums.
The incremental datum of a dimension can be
preset to a specific value at any time by
pressing the PRESET soft key, pressing a
dimension soft key and entering the desired
value.
CLEAR The Clear menu function can be used at any
time to simultaneously clear all incremental
datums. Cleared incremental datums (D1) are
made equal to absolute datums (D0).