HEIDENHAIN ND 2100G - Manual (Page 267)

ND 2100G GAGE-CHEK 267
2.4 F
o
rm
ulas
Setup function
The Setup function is used to specify bar graph parameters for the
current part including:
„ Max value (BarMax)
„ Min value (BarMin)
„ High limit (HiLimit)
„ High warning (HiWarn)
„ Low limit (LoLimit)
„ Low warning (LoWarn)
„ Nominal value (Nominal)
To insert the Setup function:
U Press the OTHER... soft key
U Press the XTRA dimension key
U Use the arrow cursor keys to highlight Setup
U Press the ENTER key
U Use the arrow cursor keys to highlight the desired bar graph
parameter
U Press the ENTER key
Setup function.
Setup function syntax
Hn = SetupParameter(Dimension,value)
Example:
H1 = SetupHiWarn(A,1.75mm)
H1 = SetupHiWarn(B,2.00mm)
H1 = SetupHiWarn(C,2.25mm)
H1 = SetupHiWarn(D,2.50mm)
Sets the Bar graph high warning parameters of dimensions A
through D to different values.