HEIDENHAIN ND 2100G - Manual (Page 61)

ND 2100G GAGE-CHEK 61
2.1 ND 21
0
0
G Shipment Cont
ents
Repackaging the ND 2100G
When shipping the ND 2100G on to an end-user, repackage all
ND 2100G components in the original packaging as received from the
factory.
„ Connect the mounting screws and washer to the ND 2100G
instrument
„ Replace the contents of the cardboard box insert if shipping the
ND 2100G on to an end-user. The cardboard box can be empty if
returning the ND 2100G to the factory for service.
„ Repackage the instrument, foam and cardboard box insert as
originally shipped from the factory. The instrument should be
oriented face-up in the carton.
„ Replace the warranty card and slip sheets originally found at the top
of the carton when shipping on to an end-user. The “Before you
begin” slip sheet should be inserted last.
The original packaging must be duplicated and the LCD
must be inserted face-up to prevent damage to the
screen.
It is not necessary to ship the mounting stand and
hardware with the instrument when returning the
ND 2100G for service.