HEIDENHAIN ND 2100G - Manual (Page 12)

12
Tolerances setup screen .... 84
Nominal values with tolerances .... 85
Nominal with +/- tolerances .... 85
Nominal with ++ tolerances .... 86
Nominal with -- tolerances .... 87
Nominal with fixed limits .... 88
Specifying an audio alert .... 89
Mirror values .... 90
SPC setup screen .... 91
Subgroup size .... 91
Max subgroups .... 91
Graph points .... 92
Next record ID .... 92
Dimension .... 92
UCL and LCL .... 93
x, r Ucl and Lcl .... 93
Warning limits .... 95
Showing and hiding SPC graphs .... 95
Header setup screen .... 96
Labels .... 96
Prompts .... 96
Memory setup screen .... 97
S labels setup screen .... 97
S formulas setup screen .... 98
Globals setup screen .... 98
Channels setup screen .... 99
Specifying the input channel .... 99
Selecting the channel input type .... 100
Specifying input channel setup parameters .... 101
Master link probe balancing .... 101
Setting the resolution for the linked channels .... 102
Specifying channel input resolution .... 103
Specifying units of measure .... 104
Reversing channel input polarity .... 104
Specifying encoder reference marks .... 105
Changing the machine zero position .... 106
Enabling scale error notification .... 106
Calibrating LVDT and HBT transducer gain .... 106
Centering (nulling) LVDT and HBT transducers .... 107
Selecting an external RS-232 channel .... 108
Specifying an RS-232 input port .... 108
EnDat 2.2 encoder interface .... 109
Master setup screen .... 111
Specifying the number of calibration points .... 111
Selecting calibration type .... 111
Locking the calibration process if warnings occur .... 112
Specifying a calibration interval .... 112
Using dynamic Min/Max values for calibration .... 113
Specifying Min and Max calibration warnings .... 114