HEIDENHAIN ND 2100G - Manual (Page 140)

140 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p File type
The USB port data file type can be specified to replace existing files (of
the same name) on the USB flash drive, append to the existing file or
create new files that are auto numbered sequentially in ascending
order (Data1.txt, Data2.txt.....DataN.txt).
To specify File Type:
U Highlight the File Type field
U Press the REPLACE, APPEND or AUTONO. soft key
U Press the ENTER key
Current auto (file) number
When the USB data file type is specified as AutoNo, the file number
of the next file saved to the USB drive can be manually specified.
For example, entering a 2 into the Cur Auto No field will cause the next
data file saved on the USB drive to be named Data2.txt. Any file that
already exists on the USB flash drive with the same name will be
overwritten.
To specify Current Auto Number:
U Highlight the Cur Auto No field
U Use the numeric keypad to enter the desired number of the next file
U Press the FINISH key