HEIDENHAIN ND 2100G - Manual (Page 6)

6 Preface
Information contained in this
manual
This User's manual covers the operation, installation, setup and
specifications of the ND 2100G. Operating information is contained in
chapter 1. Installation, setup instructions and specifications are
contained in chapter 2.
Fonts used in this manual
The following fonts are used to indicate operator controls or to show
emphasis:
„ Operator controls - soft keys and other panel keys are shown in
upper case
„ Emphasis - Items of special interest or concepts that are
emphasized to the user are shown in bold type
Showing sequences of key presses
The ND 2100G user performs sequences of soft key and panel key
presses to measure part features and complete other tasks. These
sequences are indicated using text as shown in the following
example:
„ Press the MENU... soft key, press the DATUM... soft key and then
press the MASTER soft key is sometimes abbreviated as:
„ Press MENU/DATUM/MASTER
Symbols within notes
Notes are marked with symbols on the left indicating the type, or
potential severity of the information.
General Information
This is additional or supplementary information about an
activity or concept.
Warning
This warns of a situation or condition that could lead to
measurement errors, equipment malfunction or
equipment damage. Do not proceed until the message is
read and understood.
Caution - Risk of electric shock
This warns of a situation or condition that could lead to
electrical shock and to personal injury or death. Do not
proceed until the message is read and understood.