HEIDENHAIN ND 2100G - Manual (Page 68)

68 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p 2.3 Software setup
The operating parameters of the ND 2100G must be configured prior
to using the system for the first time, and any time part measurement,
reporting or communication requirements change. Day to day use of
the ND 2100G does not require reconfiguration of system settings.
Software can be configured manually using the Setup menu screens,
or automatically by loading a settings file saved after a previous setup
session. Settings files are loaded from USB drives.
Parameters configured in setup screens will be retained until:
„ The data-backup battery is changed
„ The data and settings are cleared by maintenance personnel
„ Parameters are changed using the Setup menu screens
„ Certain software upgrades are performed
„ Previously saved settings files are loaded
Parameter changes made in any of the setup screens can
change the operation of the ND 2100G. For this reason
critical setup parameters are password protected. Only
qualified personnel should be given password access to
setup screen parameters. Refer to "Supervisor setup
screen" on page 161 for unlocking of password protected
setup functions.