HEIDENHAIN ND 2100G - Manual (Page 139)

ND 2100G GAGE-CHEK 139
2
.3
S
o
ft
wa
re
s
e
tu
p USB setup screen
The USB port can send data to a flash drive on the USB port or to a
USB printer. The USB setup screen contains data and choice fields for
configuring communication parameters of the USB port.
Data
Data can be sent to the USB port as a report formatted in the Report
setup screen, or as record data formatted in the Send setup screen, or
as both. The USB port can also be disabled for data transmission by
selecting None.
To specify the Data:
U Highlight the data field
U Press the soft key for the type of data to be sent
U Press the ENTER key
Destination
Data can be sent through the USB port to be printed on a printer (HP2)
or to be stored as a file (File) on a USB flash drive. Files stored on flash
drives are named DataN.txt by the ND 2100G system, where N
denotes the number of the data file.
To specify a data destination:
U Highlight the destination field
U Press the FILE or HP2 soft key
U Press the ENTER key
USB setup screen.