HEIDENHAIN ND 2100G - Manual (Page 138)

138 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Specifying end of line (EOL) delay
The EOL delay field is used to specify the delay inserted after each line
is transmitted. This delay can be increased or decreased to
accommodate various serial devices.
To specify EOL delay:
U Highlight the EOL Delay field
U Use the numeric keypad to specify delays (in milliseconds) from 0 to
10 seconds between lines
U Press the ENTER key
Serial port data type
Data can be sent to the serial port as a report formatted in the Report
setup screen, or as record data formatted in the Send setup screen, or
as both. The serial port can also be disabled for data transmission by
selecting the NONE soft key.
To specify serial port data type:
U Highlight the Data field
U Press the soft key for the type of data to be sent
U Press the ENTER key