HEIDENHAIN ND 2100G - Manual (Page 134)

134 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Send characters setup screen
Transmitted data can include ASCII codes such as Carriage Return
(ASCII code 10), Line Feed (ASCII code 13) and others to provide
formatting based on the requirements of the receiving computer
software. Multiple ASCII codes can be included in a single field when
separated by spaces.
To specify ASCII codes:
U Highlight one of the Send Chars parameter fields
U Use the numeric keypad to enter the desired ASCII code
U Press the ENTER key to advance to the next parameter
U Repeat these steps until all desired ASCII codes have been entered
U Press the FINISH key
Send characters setup screen.
Field Description
-Send Before record data.
+Send After record data.
-Lbl Before the form.
+Lbl After the form
-Dim After each dimension value.
+Dim After each unit of measure.
-Unt Before each unit of measure.
+Unt After each unit of measure.
Refer to the ASCII codes table on page 131.