HEIDENHAIN ND 2100G - Manual (Page 160)

160 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Scr Saver Off
The Screen Saver Off field is used to specify the range of motion in
counts (increments of resolution) required on any channel to turn the
screensaver off. For example, when Scr Saver off = 20, and the
channel resolution is 0.001 mm, a movement of 0.020 mm will turn
the screen saver off. When the Screen Saver Off field is zero, only
pressing a front panel key will turn the screensaver off.
To specify Scr Saver Off:
U Highlight the Scr Saver Off field
U Use the numeric keypad to enter the range of motion required to
deactivate the screen saver
U Press the ENTER key
Startup hold
The ND 2100G screen is displayed upon startup. Enter No into the
Startup hold field to display the startup screen for a few seconds and
then automatically display the home screen. Enter Yes to display the
startup screen until the user presses the ENTER key.
To specify Startup Hold:
U Highlight the Startup Hold field
U Press the YES or NO soft key
U Press the ENTER key
Strict Unit Check
Enter Yes into the Strict Unit Check field to prevent calculations with
mixed units of measure.
Example:
When Yes, the calculation:
15 mm+2.0 will not be allowed because of mixed units
When No, the calculation:
15 mm+2.0 = 17.0 Only numeric coefficients are used.
To specify Strict Unit Check:
U Highlight the Strict Unit Check field
U Press the YES or NO soft key
U Press the ENTER key