HEIDENHAIN ND 2100G - Manual (Page 49)

ND 2100G GAGE-CHEK 49
1
.5 Oper
ating instr
u
ctions
Presetting a dimension reference to a specific value
Dimensions can be preset to a user-specified value using the Datum/
Preset function. The reference is temporary in the sense that it uses
the incremental datum D1, and has no effect on the absolute datum
D0.
To preset a dimension reference:
U Press the MENU... soft key
U Press the DATUM soft key
U Press the PRESET soft key. The Select dimensions screen will be
displayed.
U Press the dimension key associated with the dimension you wish to
preset. A text line will be displayed
U Use the numeric keypad to enter the reference value (preset) of the
new reference
U If desired, press the W/NOM soft key to change the nominal value
in the Tolerance setup screen to the new preset reference value
U Press the ENTER key to preset the dimension measurement
reference
Dimension preset text line.
Enter the reference value.
Dimension A preset.