HEIDENHAIN ND 2100G - Manual (Page 158)

158 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Misc. setup screen
The Misc setup screen contains fields for specifying keypad, LCD
display, audio, SPC performance display, slew rate and screen saver
parameters.
Key delay
The Key Delay field is used to adjust the rate at which front panel key
presses will be accepted, and characters will be repeated when a front
panel key is pressed and held down. As the delay value is increased,
the rate of key entry and auto repeat decreases.
To specify Key Delay:
U Highlight the Key Delay field
U Use the numeric keypad to enter a key delay value
U Press the ENTER key
Speaker volume
The Volume field is used to adjust the loudness of ND 2100G speaker
tones that signal key presses and alerts. Volume settings range from
0 to 10. A volume setting of 0 disables the audio output.
To specify Speaker Volume:
U Highlight the Speaker Volume field
U Use the numeric keypad to enter the desired volume
U Press the ENTER key
Data entry message time
The Data Entry Msg field is used to specify the duration of the display
of the data entry confirmation message “Data has been added to the
database” each time a value is entered. For example, when this value
is 2, the message will be displayed for approximately 2 seconds.
Durations range from 0 to 9999. When the value is 0, no message is
displayed. When the value is very large, the message will be displayed
until the user presses the Quit key, or the duration is allowed to
complete.
To specify Data Entry Message time:
U Highlight the Data Entry Msg field
U Use the numeric keypad to enter the time to display a confirmation
message
U Press the ENTER key
Misc. setup screen.