HEIDENHAIN ND 2100G - Manual (Page 151)

ND 2100G GAGE-CHEK 151
2
.3
S
o
ft
wa
re
s
e
tu
p RsetDyn
Resets the minimum or maximum values accumulated during
dynamic measurements for this dimension.
r...
The r... function selects the line graph view of ranges of stored records
for display on the screen.
Send
Transmits the current value displayed on the LCD for this dimension.
The Send function transmits data to a printer or a computer or both
depending on parameters configured in the Parallel or RS-232 setup
screens.
SendRec
The Send Rec function transmits the last (most recent) record, a range
of records, or all records.
View...
Changes to the DRO and SPC data view for all dimensions.
Zero
Zeros the current datum for all dimensions.
x...
The x... function selects the line graph view of the mean of stored
records for display on the DRO screen.
Func.
To map a hot key to a custom ND 2100G function:
U Press the FUNC. soft key
U Use the numeric keypad to enter the custom function number. The
mapped custom function will be executed when the key is pressed.
Custom functions cannot be mapped to dimension keys.
Custom functions are described in the Formulas section
on page 238.