HEIDENHAIN ND 2100G - Manual (Page 157)

ND 2100G GAGE-CHEK 157
2
.3
S
o
ft
wa
re
s
e
tu
p Teaching a probe diameter
During measurements involving the touch probe, the ND 2100G
subtracts the radius of the touch probe tip to determine true position
of the probe. Since probe tip diameters can vary, the ND 2100G must
determine the exact diameter from a test that utilizes a known
standard.
To teach the ND 2100G the probe diameter:
U Highlight the Probe Diameter field
U Press the TEACH soft key. Instructions will be presented that
describe the entire teach process.
U Follow the instructions given, while being careful to make
orthogonal probe contacts with both sides of the standard
Be careful to make orthogonal probe contacts with both sides of the
standard.