Toa SX-2000 Series Installation User Manual
Matrix system sx-2000 series, Installation manual
This manual is related to the following products:
Table of contents
Document Outline
- 1. NOMENClATURE AND FUNCTIONS
- 1.1. SX-2000SM System Manager
- 1.2. SX-2000AI Audio Input Unit
- 1.3. SX-2100AI Audio Input Unit
- 1.4. SX-2000AO Audio Output Unit
- 1.5. SX-2100AO Audio Output Unit
- 1.6. SX-2000CI Control Input Unit
- 1.7. SX-2000CO Control Output Unit
- 1.8. RM-200SF Fireman's Microphone
- 1.9. RM-200SA Remote Microphone
- 1.10. RM-210 Remote Microphone Extension
- 1.11. RM-200RJ Terminal Unit
- 1.12. Optional Modules
- 1.13. VP-2064, VP-2122, VP-2241, and VP-2421 Power Amplifiers
- 1.14. VP-200VX Power Amplifier Input Module
- 1.15. VP-3154, VP-3304, and VP-3504 Power Amplifiers
- 2. installation
- 2.1. SX-2000SM
- 2.2. SX-2000AI and SX-2100AI
- 2.3. SX-2000AO and SX-2100AO
- 2.3.1. Setting the device number
- 2.3.2. 24 V Emergency cutoff input settings (DIP switch 8 operation) (SX-2000AO only)
- 2.3.3. Converting an output into a transformer-balanced output (SX-2000AO only)
- 2.3.4. Changing the method of power supply for the control input signal applied to the Local Audio Control Input Terminal (SX-2100AO only)
- 2.4. SX-2000CO
- 2.5. RM-200SF, RM-200SA, and RM-210
- 2.5.1. RM-200SF and RM-200SA device number settings (DIP switches 1 – 3 operation)
- 2.5.2. Adjusting microphone sensitivity
- (RM-200SF: DIP switch 5 operation or RM-200SA: DIP switch 4 operation)
- 2.5.3. CPU OFF function (general urgency all-call) settings
- (RM-200SF: DIP switch 6 operation or RM-200SA: DIP switch 5 operation)
- 2.5.4. RM Communication function setting
- (RM-200SF: DIP switch 4 operation or RM-200SA: DIP switch 6 operation)
- 2.5.5. Using an external microphone (RM-200SA only)
- 2.5.6. Compressor function setting
- 2.5.7. Microphone fault detection function setting (RM-200SA only)
- 2.5.8. Installing the RM-200SF on a wall
- 2.5.9. RM-200SA expansion with the addition of the RM-210 (Installed on a flat surface)
- 2.5.10. Installing the RM-200SA on a wall
- 2.5.11. Installing the RM-210 on a wall
- 2.5.12. Creating remote microphone name labels
- 2.6. VP-2064, VP-2122, VP-2241 and VP-2421 Power Amplifiers
- 2.7. VP-3154, VP-3304 and VP-3504 Power Amplifiers
- 2.8. Rack Mounting
- 3. System Configuration Example
- 4. Connections
- 5. SPEAKER LINE INITIAL SETTING
- 6. Inserting a CF Card
- 7. TIME SETTINGS
- 8. KEY LOCK SETTINGS AND CANCELLATION
- 9. OUTPUTTING LOG DATA (SX-2000SM: DIP Switches 1 and 2 operations)
- 10. FAILURE INDICATIONs
- 11. SPECIFICATIONS
- 11.1. SX-2000SM System Manager
- 11.2. SX-2000AI Audio Input Unit
- 11.3. SX-2100AI Audio Input Unit
- 11.4. SX-2000AO Audio Output Unit
- 11.5. SX-2100AO Audio Output Unit
- 11.6. SX-2000CI Control Input Unit
- 11.7. SX-2000CO Control Output Unit
- 11.8. RM-200SF Fireman's Microphone
- 11.9. RM-200SA Remote Microphone
- 11.10. RM-210 Remote Microphone Extension
- 11.11. RM-200RJ Terminal Unit
- 11.12. SX-200RM Remote Microphone Interface Module
- 11.13. D-921E Microphone/Line Input Module
- 11.14. D-921F Microphone/Line Input Module
- 11.15. D-922E Microphone/Line Input Module
- 11.16. D-922F Microphone/Line Input Module
- 11.17. D-936R Stereo Input Module
- 11.18. VP-2064 Power Amplifier 4 x 60 W
- 11.19. VP-2122 Power Amplifier 2 x 120 W
- 11.20. VP-2241 Power Amplifier 1 x 240 W
- 11.21. VP-2421 Power Amplifier 1 x 420 W
- 11.22. VP-3154 Digital Power Amplifier 4 x 150 W
- 11.23. VP-3304 Digital Power Amplifier 4 x 300 W
- 11.24. VP-3504 Digital Power Amplifier 4 x 500 W
- 11.25. VP-200VX Power Amplifier Input Module
- AppendIx: ADDITIONAL INSTALLATION INSTRUCTIONS
- FOR AN EN 54-16 COMPLIANT SYSTEM
- 1. General Information
- 2. Indications and Controls in Access Level1
- 3. Indications and Controls in Access Level 2
- 4. Overview of the Access Level Requirements for the Equipment and related Functions
- 5. Power Supply
- 6. Cabinets
- 7. Standby (reserve, redundant) Amplifiers
- 8. Setting on the System Manager SX-2000SM