Toa SX-2000 Series Installation - Manual (Page 167)

167
• Accessories
removable terminal plug (8 pins) ............................................. 4
removable terminal plug (6 pins) ............................................. 8
removable terminal plug (4 pins) ............................................. 1
removable terminal plug (2 pins) ............................................. 1
rack mounting screw with plain washer (5 x 12) ..................... 4
* 0 dB = 1 V
Note: the design and specifications are subject to change without notice for improvement.
DS link
usable unit VX-2000DS, VX-3000DS
connector/cable 2 interfaces, rJ45 connector,
Shielded category 5 twisted pair cable for lAN (cAt5-StP)
maximum cable Distance 5 m
cI/co link
usable unit SX-2000cI or SX-2000co
connector/cable 1 interface, rJ45 connector,
Shielded category 5 twisted pair cable for lAN (cAt5-StP)
maximum cable Distance 800 m
Speaker line failure Detection Section
connector/cable removable terminal blocks, SP/AmP: 8 pins per terminal block,
StANDBy AmP: 2 pins, AWG 16 – 24
maximum Input Voltage
and current
100 Vrms, 5 Arms
fault Detection System Short circuit, open circuit, ground fault
method Impedance or End of line
End of line In Case of Normal: Terminated by 470 kΩ between the speaker line and
the shield
In case of open: opened between the speaker line and the shield
Impedance Minimum Load: 2 kΩ (5 W) at 100 V line
control Input 8 inputs, no-voltage make contact input, open voltage: under 40 V Dc,
short-circuit current: 2 mA, photo coupler input,
removable terminal block (6 pins)
control output 8 outputs, c contact, no-voltage make contact output: relay contact output
(withstand voltage: 40 V Dc, control current: 2 – 300 mA),
removable terminal block (6 pins)
operating temperature 0°c to 40°c
operating Humidity 35% to 80% rH (no condensation)
finish Panel: Aluminum, black, alumite
case: Surface-treated steel plate
Dimensions 482 (w) x 88.4 (h) x 349 (d) mm
Weight 7.1 kg