Toa SX-2000 Series Installation - Manual (Page 37)

37
[Side]
EXTENSIO
N
19
12. Status Indicators (Red/Yellow/green)
Light, flash, or go off depending on the current
operation state of function keys, failure state or
emergency state. (See the separate operating
Instructions, "rm-200Sf fireman's microphone"
and "operation.")
13. Selection Indicators (green)
light or go off depending on the current operation
state of function keys. (See the separate operating
Instructions, "rm-200Sf fireman's microphone"
and "operation.")
14. Function Keys (R1 – R3)
Positioned in top-down order (r1, r2, r3).
Pressing a specific function key executes the
function that has been assigned to that key by the
SX-2000 Setting Software.
Assignment of functions to specific keys is done
using the SX-2000 Setting Software. (See the
separate Setting Software Instructions, "Event
Settings.")
15. Microphone Indicator (green)
lights or goes off depending on the current
operation state of the talk key.
16. Broadcast Status Indicator
(Yellow/green)
Lights, flashes, or goes off depending on the
current operation state of the talk key.
17. Talk Key
Press this key to broadcast a voice announcement.
It must be pressed continuously for the duration
of the broadcast.
18. Microphone
used for voice announcements.
19. RM-210 Connection Terminal [EXTENSION]
connect the rm-210 remote microphone
Extension unit to this terminal.
(See p. 84 .)
RM-200SF