Toa SX-2000 Series Installation - Manual (Page 174)

174
Input 2 channels, –50/–36/–10/+4 dB* (Selectable with the DIP switch), 4.7 kΩ,
electronically-balanced, equivalent to Xlr-3-31 type
Phantom power supply (+12 V, can be set with the DIP switch)
Ground lift switch (can be set with the DIP switch)
A/D converter 20 bits
Sampling frequency 48 kHz
frequency response 20 Hz – 20 kHz, ±1 dB (+4 dB* input)
Dynamic range over 85 dB (IHf-A weighted) (+4 dB* input)
total Harmonic Distortion under 0.2% (+4 dB* input)
finish Panel: Pre-coated steel plate, black (30% gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm
Weight 135 g
11.16. D-922F Microphone/Line Input Module
* 0 dB = 0.775 V
Note: the design and specifications are subject to change without notice for improvement.
Input 2 channels, –50/–36/–10/+4 dB* (Selectable with the DIP switch), 4.7 kΩ,
electronically-balanced, 3-pin removable terminal block
Phantom power supply (+12 V, can be set with the DIP switch)
Ground lift switch (can be set with the DIP switch)
A/D converter 20 bits
Sampling frequency 48 kHz
frequency response 20 Hz – 20 kHz, ±1 dB (+4 dB* input)
Dynamic range over 85 dB (IHf-A weighted) (+4 dB* input)
total Harmonic Distortion under 0.2% (+4 dB* input)
finish Panel: Pre-coated steel plate, black (30% gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm
Weight 125 g
11.15. D-922E Microphone/Line Input Module
* 0 dB = 0.775 V
Note: the design and specifications are subject to change without notice for improvement.
Input Monaural input x 2, –10 dB*, 10 kΩ, RCA pin jack
A/D converter 24 bits
Sampling frequency 48 kHz
frequency response 20 Hz – 20 kHz, ±1 dB (+4 dB* input)
Dynamic range over 100 dB (IHf-A weighted)
total Harmonic Distortion under 0.05%
finish Panel: Pre-coated steel plate, black (30% gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm
Weight 145 g
11.17. D-936R Stereo Input Module
* 0 dB = 0.775 V
Note: the design and specifications are subject to change without notice for improvement.
• Accessories
3-pin removable terminal plug (preinstalled on the unit) .......... 2