Toa SX-2000 Series Installation - Manual (Page 80)

80
[when the RM-200SF is installed in a wall box]
When the rm-200Sf is installed in a wall box (prepare separately), the box should measure at least 300 mm
wide x 315 mm high as illustrated below.
300 min.
50 min. 50 min.
50 min.
50 min.
315 min.
Effective depth: 100 min.
Mounting
base surface
Rear surface of
the front door
Inside dimension of the box
unit: mm
Step 3. Plug the rm-200Sf's extension connector into the connector port on the wall mount bracket unit.
Step 4. Attach the rm-200Sf unit to the wall mount bracket unit.
Extension connector
RM-200SF
Wall mount bracket unit
(supplied with the RM-200SF)
3
4
Note
When attaching the rm-200Sf unit, check
that the extension connector is not pinched.