Toa SX-2000 Series Installation - Manual (Page 6)

6
Protective cover
10 11 12 13 14
15 16 18 19 17
1
2
3
4
5
6
7
8
9
Inside of the protective cover
1. NOMENCLATURE AND FUNCTIONS
1.1. SX-2000SM System Manager
[Front]
SX-2000SM
1. LAN Indicator [LAN] (green)
lights when the lAN connection terminal (31) on
the rear panel is connected, and flashes during
lAN communications.
2. SX Link A Indicator [SX LINK A] (green)
lights when the SX link A terminal (29) on
the rear panel is connected, and flashes while
communications are being performed via the SX
link A terminal.
3. SX Link B Indicator [SX LINK B] (green)
lights when the SX link B terminal (29) on
the rear panel is connected, and flashes while
communications are being performed via the SX
link B terminal.
4. Emergency Indicator [EMERgENCY] (Red)
lights while the general urgency all-call is being
made ( p. 70 ) or when the SX-2000 system is in
an emergency condition, and flashes when a 24 V
emergency cutoff* state occurs involving any SX-
2000Ao within the system.
* In the SX-2000 system, a 24 V emergency cutoff
input terminal that allows control of an emergency
audio input is provided on the SX-2000Ao's rear
panel. When the SX-2000 system is combined
with another emergency broadcast system, a
24 V Dc is normally kept being supplied to this
emergency cutoff input terminal and is cut off
(24 V emergency cutoff function) in emergency
situations. this interrupts the general-purpose
broadcast from the SX-2000, allowing the
emergency broadcast system to override it. (for
details, see p. 58 .)
5. CpU OFF Indicator [CpU OFF] (Red)
lights while the general urgency all-call (cPu off
state) is being made ( p. 70 ).
6. Standby Indicator [STANDBY] (green)
lights when the SX-2000 system is operating on
the backup power supply during power failures.
It also lights when the system reset cannot be
performed using the SX-2000 Setting software.
Note that if the standby indicator lights, it is not
possible to restart your SX-2000Sm using the
Setting software.
to perform system reset, press the reset key (15)
inside the protective cover to restart.
7. general Indicator [gENERAL] (Yellow)
lights while the general urgency all-call is being
made ( p. 70 ) or when a failure is detected in the
SX-2000SM. Lights or flashes when a failure is
detected in the system.