Toa SX-2000 Series Installation - Manual (Page 170)

170
11.8. RM-200SF Fireman's Microphone
* 0 dB = 1 V
Note: the design and specifications are subject to change without notice for improvement.
• Optional product
remote microphone Extension unit: rm-210
• Accessories
Emc clamp .................................................................... 1
Wall mounting bracket unit ............................................ 1
4 x 25 tapping screw for wooden wall ........................... 2
m3.5 x 20 screw for electrical box ................................. 2
Power Source 24 V Dc (operating range: 15 – 40 V Dc, supplied from the SX-2000 system.)
current consumption 240 mA or less
Audio output 0 dB*, transformer-balanced
Distortion 1% or less
frequency response 200 Hz – 15 kHz
S/N ratio 55 dB or more
microphone unidirectional dynamic microphone with talk key, AGc (oN/off switchable),
microphone element failure detectable by using a built-in oscillator
chime Built-in (Pcm sound source), monitoring available with a built-in speaker.
Volume control microphone volume control, monitor speaker volume control,
chime volume control (using the software)
connection cable main line: Shielded cPEV cable (each one pair of Audio line, Data line,
monitor/control line, and power supply line) or Shielded category 5 twisted
pair cable for lAN (cAt5-StP), m3 screw terminal
maximum cable Distance 800 m (total)
No. of connectable
rm-210 units
max. 5 units
monitor Speaker Built-in type
operation Emergency key, function keys, cPu switch, reset switch
Indicator Status indicators, Power indicator, failure indicator, cPu indicator,
Selection indicators, microphone indicator, Broadcast status indicator
operating temperature 0°c to 40°c
operating Humidity 35% to 80% rH (no dew condensation)
finish ABS resin, blueish gray (PANtoNE 538 or its equivalent)
Dimensions 200 (w) x 215 (h) x 95 (d) mm (including the Wall mounting Bracket)
Weight 1.48 kg
Applicable Box yS-11A