Toa SX-2000 Series Installation - Manual (Page 14)

14
45. SX Link Terminals [SX LINK A/B]
use switching hubs to connect between the SX
link terminals of the SX-2000Sm, SX-2000AI, SX-
2100AI, SX-2000Ao, and SX-2100Ao. connect
each of the SX links A and B to the same
switching hub*, or to different switching hubs* that
have been connected in star configuration.
Notes
• Be sure to connect both terminals of A and B.
• After connection completion, press the Reset
key to reactivate the SX-2000AI.
* contact your toA dealer for more information
on switching hubs.
46. MAC Address
mAc address to be used for SX link connection.
1 2 3 4
Function LED On/Flashing LED Off
2. B connection confirmation Connected Unconnected
1. B operation in progress
indication
Operating Not operating
4. A connection confirmation Connected Unconnected
3. A operation in progress
indication
Operating Not operating
SX-2000AI