Toa SX-2000 Series Installation - Manual (Page 166)

166
11.5. SX-2100AO Audio Output Unit
Power Source usable power supply unit: VX-200PS
24 V Dc (operational range: 20 V – 40 V Dc)
two power inputs construction enables redundant power supply.
current consumption under 1.7 A (maximum value in the power operating range)
under 1.2 A (when operated on 24 V Dc)
Note: Excludes current consumption of the external equipment powered by
the unit.
Indication 18 alphanumeric characters, level indication (8 outputs, monitor),
run indicator, Power indicator, Standby indicator, cPu off indicator
operation function keys, output volume controls, monitor volume control,
channel keys, monitor oN/off key, menu screen operation keys
PA link
usable Amplifier VP-2064, VP-2122, VP-2241, VP-2421, VP-3154 ,VP-3304, VP-3504
(VP-200VX is required for VP-2000 series amplifier)
connector/cable rJ45 connector, Shielded category 5 twisted pair cable for lAN (cAt5-StP)
Audio output characteristic 8 outputs and standby AMP, 0 dB*, suitable load: 600 Ω or above,
electronically-balanced, monitoring possible using built-in speaker
frequency response: 20 Hz – 20 kHz
Sampling frequency: 48 kHz
D/A converter: 24 bit
maximum cable Distance 5 m
local Audio input
connector/cable 2 inputs, rJ45 connector,
Shielded category 5 twisted pair cable for lAN (cAt5-StP)
Audio Input 0 dB*, 10 kΩ, electronically-balanced
Audio input
characteristic
frequency response: 20 Hz – 20 kHz
Sampling frequency: 48 kHz
A/D converter: 24 bit
control Input 2 inputs, no-voltage make contact input, open voltage: 12 V Dc,
short-circuit current: 2 mA, photo coupler input
SX link
Network I/f 2 100BASE-tX circuits, rJ45 connector, decentralized installation possible
connection cable/Device Shielded category 5 twisted pair cable for lAN (cAt5-StP)
to be connected via the switching hub specified by toA.
Note: this network must be made completely independent from other lAN.
maximum cable Distance 100 m (between this unit and a switching hub)
Analog link
Input/output connector Input: 1 input, rJ45 connector
output: 1 output, rJ45 connector
connection cable Shielded category 5 twisted pair cable for lAN (cAt5-StP)
(each one pair of audio wire, cPu off, control wire for system reset/start,
and connection check wire)
maximum cable Distance 800 m (total)
• Accessories
removable terminal plug (12 pins) ........................................... 2
removable terminal plug (6 pins) ............................................. 8
removable terminal plug (4 pins) ............................................. 1
removable terminal plug (3 pins) ............................................. 1
removable terminal plug (2 pins) ............................................. 1
rack mounting screw with plain washer (5 x 12) ..................... 4
• Optional product
line transformer: It-450