Toa SX-2000 Series Installation - Manual (Page 173)

173
Input 2 channels, mic/line changeable
Mic: –50/–36 dB*, 4.7 kΩ, electronically-balanced,
equivalent to Xlr-3-31 type
Line: –10/+4 dB*, 10 kΩ, electronically-balanced,
equivalent to Xlr-3-31 type
Phantom power supply (+12 V, can be used when set for the microphone)
Ground lift switch
A/D converter 24 bits
Sampling frequency 48 kHz
frequency response 20 Hz – 20 kHz, ±1 dB (+4 dB* input)
Dynamic range over 100 dB (IHf-A weighted) (+4 dB* input)
total Harmonic Distortion under 0.05% (+4 dB* input)
finish Panel: Pre-coated steel plate, black (30% gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm
Weight 150 g
11.14. D-921F Microphone/Line Input Module
Input 2 channels, mic/line changeable
Mic: –50/–36 dB*, 4.7 kΩ, electronically-balanced,
3-pin removable terminal block
Line: –10/+4 dB*, 10 kΩ, electronically-balanced,
3-pin removable terminal block
Phantom power supply (+12 V, can be used when set for the microphone)
Ground lift switch
A/D converter 24 bits
Sampling frequency 48 kHz
frequency response 20 Hz – 20 kHz, ±1 dB (+4 dB* input)
Dynamic range over 100 dB (IHf-A weighted) (+4 dB* input)
total Harmonic Distortion under 0.05% (+4 dB* input)
finish Panel: Pre-coated steel plate, black (30% gloss)
Dimensions 35 (w) x 119.5 (h) x 178.4 (d) mm
Weight 140 g
11.13. D-921E Microphone/Line Input Module
* 0 dB = 0.775 V
Note: the design and specifications are subject to change without notice for improvement.
* 0 dB = 0.775 V
Note: the design and specifications are subject to change without notice for improvement.
• Accessories
3-pin removable terminal plug (preinstalled on the unit) .......... 2