Toa SX-2000 Series Installation - Manual (Page 42)

42
1.10. RM-210 Remote Microphone Extension
Note
up to 5 rm-210 remote microphone Extensions can be connected to each rm-200Sf fireman's microphone.
up to 4 rm-210 remote microphone Extensions can be connected to each rm-200SA remote microphone.
[Top]
1
3
2
4
1. Indication Label Insert Slot
the label can be printed using the SX-2000
Setting Software. (See the separate Setting
Software Instructions, "Printing labels for remote
microphones.")
2. Status Indicators (Red/Yellow/green)
Light, flash, or go off depending on the current
operation state of function keys.
3. Selection Indicators (green)
light or go off depending on the current operation
state of function keys
4. Function Keys (1 – 10)
Positioned in top-down order (1, 2 ... 10). Pressing
a specific function key executes the function that
has been assigned to that key by the SX-2000
Setting Software.
Assignment of functions to specific keys is done
using the SX-2000 Setting Software. (See the
separate Setting Software Instructions, "rm
function Key Settings.")
[Side]
5
5. RM Connection Terminal [EXTENSION]
connect the rm-200Sf, rm-200SA, or other rm-
210 to this terminal. (See p. 81 and p. 84 .)
Note
Another same terminal is on the other side.
RM-210