Toa SX-2000 Series Installation - Manual (Page 157)

157
[Error Indications on the Menu Screen]
When the default display screen is displayed, pressing the menu key and then the oK key switches the
display to the error indication screen. Errors are displayed as follows. (for details, see the separate operating
Instructions, "SX-2000AI Audio Input unit" or "SX-2100AI Audio Input unit.")
FAULT
COMPONENT ERROR
FAULT
FAULT DETECTED
FAULT
COM
SX LINK COM FAULT
Failure Indication Description
System equipment or module
configuration differs from that set
by the SX-2000 Setting Software.
System has failed.
Communications cannot be
established between the
SX-2000AI or SX-2100AI and
SX-2000SM.
"COMPONENT ERROR"
indication displayed in the
text display area.
"FAULT" indication flashes.
"FAULT DETECTED"
indication displayed in the
text display area.
"FAULT" indication flashes.
"SX LINK COM FAULT"
indication displayed in the
text display area.
"COM" indication flashes.
"FAULT" indication flashes.
Failure Indication Description
Something is wrong with the
inserted CF card.
AI-xx UNLINKED AI-xx CF ERROR "AI-xx CF ERROR "
indication displayed in the text
display area.
AI-xx UNLINKED AI-xx ALL CH OFF "AI-xx ALL CH OFF "
indication displayed in the text
display area.
AI-xx MAINTENANCE
CF card not inserted into the
SX-2000SM.
The sound volume on all input
channels set by the SX-2000
Setting Software is muted.
The sound volume on all input
channels adjusted by the
front-mounted input volume
controls is muted.
"AI-xx MAINTENANCE"
indication displayed in the text
display area.
AI-xx SYSTEM MUTE
"AI-xx SYSTEM MUTE"
indication displayed in the text
display area.