Toa SX-2000 Series Installation - Manual (Page 111)

111
[Stereo Input Module D-936R]
connect BGm players or other sound sources to this module.
ACCESSORY I.T.E 78CK
1R 2R
1L 2L 3L
3R
4L
4R
model D-936R STEREO SELECT INPUT MODULE [ –10 dB]
Monaural input 1
Monaural input 2
Note
Since this module is equipped with 2 monaural input channels, connect a different sound source to each input.
When using a stereo sound source, convert the stereo output to monaural first and connect it to one of the two
inputs. Input terminals 1l – 4l of monaural input 1 are connected in parallel inside the module. Similarly, input
terminals 1r – 4r of monaural input 2 are internally parallel-connected.
• When separately using the L and R channels of sound source equipment, make connections as follows.
ACCESSORY I.T.E 78CK
1R 2R
1L 2L 3L
3R
4L
4R
model D-936R STEREO SELECT INPUT MODULE [ –10 dB]
Sound source equipment
L (CH 1)
Monaural input 1 terminals
Monaural input 2 terminals
D-936R
R (CH 2)
• When using the sound source's L and R channels as one channel, make connections as follows.
However, the input signal level tends to be extremely large in this case, so adjust the input level with care.
(connect the sound source equipment 1's l and r to monaural input 1 terminals, and the sound source
equipment 2's l and r to monaural input 2 terminals.)
ACCESSORY I.T.E 78CK
1R 2R
1L 2L 3L
3R
4L
4R
model D-936R STEREO SELECT INPUT MODULE [ –10 dB]
L
R
L
R
D-936R
Sound source
equipment (1)
Sound source
equipment (2)
Monaural input 1 terminals
Monaural input 2 terminals