Toa SX-2000 Series Installation - Manual (Page 108)

108
• When using a shielded CPEV cable, it is recommended to use an optional RM-200RJ Terminal Unit that
serves wiring conversion between the cPEV cable and StP category 5 straight cable (with rJ45 connectors).
connect the cPEV cable between the same terminals of both rm-200rJ units pairing cables 1 with 2, 4 with
5, 3 with 6, and 7 with 8 as shown below.
FOR SX-2000 SERIES ONLY
Over 4-pair shielded
CPEV cable (main cable)
STP Category 5 straight cable
(with RJ45 connectors)
Note
The RM-200RJ can be installed on a desk or to a wall.
RM-200SA rear
SX-200RM
44.5
116
44.5
13.5
75
84
[RM-200RJ Mounting dimensions]
RM-200RJ
RM-200RJ
1
2
5
6
3
4
7
8
Shield
1
2
5
6
3
4
7
8
Shield
STP Category 5 straight cable
(with RJ45 connectors)