Toa SX-2000 Series Installation - Manual (Page 41)

41
[Rear]
21 16 18 19 17 20
16. power Input Terminal [DC pOwER IN]
connect an optional AD-246 Ac adapter to this
terminal when extending cable length. Power
is usually supplied to the rm-200SA and rm-
210 from the SX-200rm remote microphone
Interface module. (See p. 109 .)
17. USB Terminal [USB]
Not used.
18. RM Link Terminal [RM LINK]
used to connect an SX-200rm remote
microphone Interface module via a StP category
5 cable.
19. Speaker volume Control [Sp]
Adjusts the volume of the built-in speaker.
20. Microphone volume Control [MIC]
Adjusts the volume of the microphone (1) and the
external microphone connected via the external
microphone input terminal (21).
21. External Microphone Input Terminal
[EXTERNAL MIC IN]
connect an optional external microphone* 1 to this
terminal.
Jumper settings on the circuit board must be
changed depending on the input sources. (See
p. 72 .)
Specifications: –40 dB* 2 , 2.2 kΩ, unbalanced,
mini-jack, and phantom power.
* 1 the WH-4000A, yP-m101, or yP-m301 can be
used for the external microphone.
* 2 0 dB = 1 V
RM-200SA