Toa SX-2000 Series Installation - Manual (Page 177)

177
11.20. vp-2241 power Amplifier 1 x 240 w
Power Source 28 V Dc (operating range: 20 – 40 V Dc)
m4 screw terminal, distance between barriers: 12 mm
current consumption (EN60065) 4.8 A
rated output Power 240 W (at min. resistive and max. capacitive load)
output Power 180 W (at min. resistive and max. capacitive load)
(at Ac mains of VX-200PS: 195.5 V)
240 W (at min. resistive and max. capacitive load)
(at Ac mains of VX-3000DS: 187 V – 253 V)
output Voltage 100 V (70 V, 50 V: selectable by internal wiring change)
minimum resistive load 41 Ω (at 100 V), 21 Ω (at 70 V), 10 Ω (at 50 V)
maximum capacitive load 0.5 µf (at 100 V), 1 µf (at 70 V), 1 µf (at 50 V)
Number of channels 1
Input Specified by input module VP-200VX
Number of module Slots 1
usable module VP-200VX
output Power amplifier output (speaker line):
m3.5 screw terminal, distance between barriers: 8.8 mm
frequency response 40 Hz – 16 kHz, ±3 dB (at 1/3 rated output)
Distortion 1% or less (at rated output, 1 kHz)
Signal to Noise ratio 80 dB or more
Panel Indicator channel power indicator: 1 channel, dual colour lED
overheat indicator: yellow lED
operating temperature 0 to +40°c
finish Panel: Surface-treated steel plate, black (30% gloss), paint
Dimensions 482 (w) x 88.4 (h) x 340.5 (d) mm
Weight 8.1 kg
• Accessories
rack mounting screw (5 x 12) ............................. 4
fiber washer ........................................................ 4
Note: the design and specifications are subject to change without notice for improvement.