Via rm-200rj as needed) – Toa SX-2000 Series Installation User Manual
Page 105
105
4.2.2. Connecting the SX-200RM to the RM-200SF or RM-200SA (via RM-200RJ as needed)
connect the rm link terminal of the SX-200rm unit mounted in the SX-2000AI or SX-2100AI to the terminal
block of the rm-200Sf or the rm lINK terminal of the rm-200SA. the length of the connection cable differs
depending on the method of power supply and the type of cable used.
Note
connect the rm-200Sf or rm-200SA individually to each input of the SX-200rm mounted in the SX-2000AI
or SX-2100AI.
the input channel to which the rm-200Sf or rm-200SA can be connected is assigned by the SX-2000 Setting
Software and indicated by the orange rm1 or rm2 status indicator. connect the rm-200Sf or rm-200SA
assigned the same device number as the SX-2000AI's or SX-2100AI's input channel number to the rm lINK
terminal.
(for the rm-200Sf and rm-200SA device number settings, see
.)
FOR SX-2000 SERIES ONLY
RM-200SF
RM-200SA
Connection cable
(with RJ45 connectors)
RM LINK
RM2 status LED
RM1 status LED
SX-200RM
FIREMAN'S MICROPHONE
RM-200SF
REMOTE MICROPHONE
RM-200SA
Terminal block