Interlogix NS3550-8T-2S User Manual - Manual (Page 73)

User’s Manual of NS3550-8T-2S
73
4.2.23 Daylight Saving
The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user will
re-access the WEB interface about 60 seconds later, the System Reboot screen in
Figure 4-2-35 appears.
Figure 4-2-35: System Reboot Page Screenshot
The page includes the following fields:
Object Description
 Time Zone Allow select the time zone according to current location of switch.
 Acronm User can set the acronym of the time zone. This is a User configurable
acronym to identify the time zone. ( Range : Up to 16 alpha-numeric
characters and can contain '-', '_' or '.')
 Daylight Saving Time
is is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration.
Select 'Disable' to disable the Daylight Saving Time configuration. Select
'Recurring' and configure the Daylight Saving Time duration to repeat the
configuration every year. Select 'Non-Recurring' and configure the
Daylight Saving Time duration for single time configuration. ( Default :
Disabled )
Daylight Saving Rime –
Recurring Mode
Object Description
 Week (Start Time Setting) Select the starting week number.
 Day (Start Time Setting) Select the starting day.
 Month (Start Time Setting) Select the starting month.
 Hours (Start Time Setting) Select the starting hour.
 Minutes (Start Time Setting) Select the starting minute.