Interlogix NS3550-8T-2S User Manual - Manual (Page 256)

User’s Manual of NS3550-8T-2S
256
received from neighbour devices. If at least one port has CDP awareness
enabled all CDP frames are terminated by the switch.
Note : When CDP awareness on a port is disabled the CDP information isn't
removed immediately, but gets removed when the hold time is exceeded.

Port Description Optional TLV: When checked the "port description" is included in LLDP
information transmitted.

System Name Optional TLV: When checked the "system name" is included in LLDP information
transmitted.

System Description Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
 System Capabilities Optional TLV: When checked the "system capability" is included in LLDP
information transmitted.
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information advertised
by this TLV is described in IEEE 802.1AB.
 Management Address Optional TLV: When checked the "management address" is included in LLDP
information transmitted.
The management address protocol packet includes the IPv4 address of the
switch. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement. The management
address TLV may also include information about the specific interface associated
with this address, and an object identifier indicating the type of hardware
component or protocol entity associated with this address
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.