Interlogix NS3550-8T-2S User Manual - Manual (Page 398)

398
Default Setting:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled
Example:
Disable SMAC mode
NS3550-8T-2S:/>Aggr mode smac disable
6.10 Link Aggregation Control Protocol Command
LACP Configuration
Description:
Show LACP configuration.
Syntax:
LACP Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Show LACP configuration
NS3550-8T-2S:/>lacp configuration
Port Mode Key Role
---- -------- ---- ------
1 Disabled Auto Active
2 Disabled Auto Active
3 Disabled Auto Active
4 Disabled Auto Active
5 Disabled Auto Active
6 Disabled Auto Active
7 Disabled Auto Active
8 Disabled Auto Active
9 Disabled Auto Active
10 Disabled Auto Active
LACP Mode
Description:
Set or show LACP mode.
Syntax:
LACP Mode [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable LACP protocol
disable : Disable LACP protocol
(default: Show LACP mode)
Default Setting:
disable
Example:
Enable LACP for port1~4
NS3550-8T-2S:/>lacp mode 1-4 enable
LACP Key
Description:
Set or show the LACP key.