Interlogix NS3550-8T-2S User Manual - Manual (Page 390)

User’s Manual of NS3550-8T-2S
390
Syntax:
STP Msti Map [] [clear]
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
Clear : Clear VID to MSTI mapping
Example:
Add MST1 priority value in 48.
NS3550-8T-2S:/>stp msti priority 1 48
STP MSTI Add
Description:
Add a VLAN to a MSTI.
Syntax:
STP Msti Add
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: VLAN ID (1-4095)
Example:
Add MST1 in vlan1.
NS3550-8T-2S:/>stp msti add 1 1
STP Port Configuration
Description:
Show STP Port configuration.
Syntax:
STP Port Configuration []
Parameters:
: Port list or 'all'. Port zero means aggregations.
Example:
Show STP status of Port1
NS3550-8T-2S:/>stp port configuration 1
Port Mode AdminEdge AutoEdge restrRole restrTcn Point2point
---- -------- ------------------ ------------------ -----------
1 Disabled Disabled Enabled Disabled Disabled Auto
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [] [enable|disable]
Parameters:
: Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
disable