Interlogix NS3550-8T-2S User Manual - Manual (Page 349)

User’s Manual of NS3550-8T-2S
349
NS3550-8T-2S:/>security switch snmp trap authentication failure disable
Security Switch SNMP Trap Link-up
Description:
Set or show the port link-up and link-down trap mode.
Syntax:
Security Switch SNMP Trap Link-up [enable|disable]
Parameters:
enable : Enable SNMP trap link-up and link-down
disable : Disable SNMP trap link-up and link-down
(default: Show SNMP trap link-up and link-down mode)
Default Setting:
enable
Example:
Disable SNMP trap link-up
NS3550-8T-2S:/>security switch snmp trap link-up disable
Security Switch SNMP Trap Inform Mode
Description:
Set or show the SNMP trap inform mode.
Syntax:
Security Switch SNMP Trap Inform Mode [enable|disable]
Parameters:
enable : Enable SNMP trap inform
disable : Disable SNMP trap inform
(default: Show SNMP inform mode)
Default Setting:
enable
Example:
Disable SNMP trap inform mode.
NS3550-8T-2S:/>security switch snmp trap inform mode disable
Security Switch SNMP Trap Inform Timeout
Description:
Set or show the SNMP trap inform timeout (usecs).
Syntax:
Security Switch SNMP Trap Inform Timeout []
Parameters:
: SNMP trap inform timeout (0-2147 seconds)
(default: Show SNMP trap inform timeout)
Default Setting:
1
Example:
Set SNMP trap inform timeout in 20sec.
NS3550-8T-2S:/>security switch snmp trap inform timeout 20