Interlogix NS3550-8T-2S User Manual - Manual (Page 451)

User’s Manual of NS3550-8T-2S
451
Add VCL protocol-based VLAN LLC protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Add Llc
Parameters:
: DSAP value (0x00-0xFF)
: SSAP value (0x00-0xFF)
: Protocol group ID
VCL Protocol-based VLAN Delete Ethernet II
Description:
Delete VCL protocol-based VLAN Ethernet-II protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Eth2 |arp|ip|ipx|at
Parameters:
|arp|ip|ipx|at : Ether Type (0x0600 - 0xFFFF)
VCL Protocol-based VLAN Delete SNAP
Description:
Delete VCL protocol-based VLAN SNAP protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Snap |rfc_1042|snap_8021h
Parameters:
|rfc_1042|snap_8021h : OUI value (Hexadecimal 00-00-00 to FF-FF-FF).
: PID value (0x0-0xFFFF). If OUI is 00-00-00, valid range of PID is from 0x0600-0xFFFF.
VCL Protocol-based VLAN Delete LLC
Description:
Delete VCL protocol-based VLAN LLC protocol to group mapping.
Syntax:
VCL ProtoVlan Protocol Delete Llc
Parameters:
: DSAP value (0x00-0xFF)
: SSAP value (0x00-0xFF)
VCL Protocol-based VLAN Add
Description:
Add VCL protocol-based VLAN group to VLAN mapping.
Syntax:
VCL ProtoVlan Vlan Add []
Parameters:
: Port list or 'all', default: All ports
: Protocol group ID
: VLAN ID (1-4095)
VCL Protocol-based VLAN Delete
Description:
Delete VCL protocol-based VLAN group to VLAN mapping.
Syntax:
VCL ProtoVlan Vlan Delete []
Parameters:
: Port list or 'all', default: All ports