Interlogix NS3550-8T-2S User Manual - Manual (Page 389)

389
Default Setting:
Disable
Example:
Set STP recovery value in 30 sec.
NS3550-8T-2S:/>stp recovery 30
STP Status
Description:
Show STP Bridge status.
Syntax:
STP Status [] []
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: Port list or 'all', default: All ports
Default Setting:
Disable
Example:
Show STP Bridge status.
NS3550-8T-2S:/>stp status
CIST Bridge STP Status
Bridge ID : 80:00-00:30:4F:24:04:D1
Root ID : 80:00-00:30:4F:24:04:D1
Root Port : -
Root PathCost: 0
Regional Root: 80:00-00:30:4F:24:04:D1
Int. PathCost: 0
Max Hops : 20
TC Flag : Steady
TC Count : 0
TC Last : -
Port Port Role State Pri PathCost Edge P2P Uptime
--------- -------------- ---------- --- -------- ---- --- -------------
10 DesignatedPort Forwarding 128 20000 Yes Yes 0d 00:10:32
STP MSTI Priority
Description:
Set or show the bridge instance priority.
Syntax:
STP Msti Priority [] []
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: STP bridge priority (0/16/32/48/.../224/240)
Default:
128
Example:
Set MST1 priority value in 48.
NS3550-8T-2S:/>stp msti priority 1 48
STP MSTI Map
Description:
Show or clear MSTP MSTI VLAN mapping configuration.