Interlogix NS3550-8T-2S User Manual - Manual (Page 419)

User’s Manual of NS3550-8T-2S
419
Example:
Set the port tag remarking mode in mapped.
NS3550-8T-2S:/>qos Port TagRemarking Mode 1-10 mapped
QoS Port TagRemarking PCP
Description:
Set or show the default PCP. This value is used when port tag remarking mode is set to 'default'.
Syntax:
QoS Port TagRemarking PCP [] []
Parameters:
: Port list or 'all', default: All ports
: Priority Code Point (0-7)
Default Setting:
0
Example:
Set the default PCP in 1.
NS3550-8T-2S:/>qos Port TagRemarking PCP 1-10 1
QoS Port TagRemarking DEI
Description:
Set or show the default DEI. This value is used when port tag remarking mode is set to 'default'.
Syntax:
QoS Port TagRemarking DEI [] []
Parameters:
: Port list or 'all', default: All ports
: Drop Eligible Indicator (0-1)
Default Setting:
0
Example:
Set the default EDI in 1.
NS3550-8T-2S:/>qos Port TagRemarking EDI 1-10 1
QoS Port TagRemarking Map
Description:
Set or show the port tag remarking map. This map is used when port tag remarking mode is set to 'mapped', and the
purpose is to translate the classified QoS class (0-7) and DP level (0-1) to PCP and DEI.