Interlogix NS3550-8T-2S User Manual - Manual (Page 468)

User’s Manual of NS3550-8T-2S
468
Syntax:
Erps reversion [revertive|nonrevertive]
Parameters:
revertive|nonrevertive : specifying reversion parameters
: protection group id 1 - 64
ERPS VLAN Add
Description:
Associating a given vlan to a protection group
: vlan to be protected
: protection group-id for which vid belongs to.
Syntax:
Erps vlan add
Parameters:
: VLAN ID (1-4095)
: protection group id 1 - 64
ERPS VLAN Delete
Description:
Disassociating a given vlan to a protection group
: protected vlan to be deleted
: protection group-id for which vid belongs to.
Syntax:
Erps vlan delete
Parameters:
: VLAN ID (1-4095)
: protection group id 1 - 64
ERPS MEP
Description:
Associating Port 0/1 MEP to a protection group
: Mep_ID for finding out Continuity Check errors on Port 0
: Mep_ID for finding out Continuity Check errors on Port 1
: Mep_ID for transmitting R-APS frames on Port 0
: Mep_ID for transmitting R-APS frames on Port 1
: protection group id for which mep is associating.
Syntax:
Erps mep
Parameters:
: SF mep id for Port 0
: SF mep id for Port 1
: CC/RAPS mep id for Port 0
: CC/RAPS mep id for Port 1
: protection group id 1 - 64
ERPS RPL Neighbour
Description:
Selection of RPL neighbour for a protection group
(east|west) : selected east(Port 0) or west(Port 1) as RPL neighbour
: protection group id for selecting RPL Block.
Syntax:
Erps rpl neighbour