Interlogix NS3550-8T-2S User Manual - Manual (Page 335)

User’s Manual of NS3550-8T-2S
335
Parameters:
: Private VLAN ID, default: Show all PVLANs. The allowed range for a Private VLAN ID is the same as the
switch port number range.
Example:
Lookup PVLAN
NS3550-8T-2S:/>pvlan lookup
PVLAN ID Ports
-------- -----
1 1-10
PVLAN Isolate
Description:
Set or show the port isolation mode.
Syntax:
PVLAN Isolate [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable port isolation
disable : Disable port isolation
(default: Show port isolation port list)
Default Setting:
disable
Example:
Enable isolate for port10
NS3550-8T-2S:/>pvlan isolate 10 enable
6.7 Security Command
Security Switch User Configuration
Description:
Show users configuration.
Syntax:
Security Switch Users Configuration
Default Setting:
User Name Privilege
admin 15
Example:
Show users configuration
NS3550-8T-2S:/>security switch user configuration
Users Configuration:
====================
User Name Privilege Level
-------------------------------- ----------------
admin 15
Security Switch User Add
Description:
Add or modify users entry.